Matek Flight Controller F722-WING

Description

Matek Flight Controller F722-WING
FC Specifications MCU: 216MHz STM32F722RET6 IMU: MPU6000 (SPI) Baro: BMP280 (I2C) OSD: AT7456E (SPI) Blackbox: MicroSD card slot (SPI) 5x Uarts (1,2,3,4,6) with built-in inversion 1x Softserial-Tx 2x Motors, 6x Servos outputs 1x I2C 4x ADC (VBAT, Current, RSSI, AirSpeed) 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red) Switchable Dual Camera Inputs Switchable 5V/9V for Camera/VTX High-precision Current Sense TR/SA VTX control: Yes WS2812 Led Strip : Yes Beeper : Yes RSSI: Yes Analog Airspeed sensor: Yes Digital Airspeed sensor: Yes FC Firmware INAV Flight/BetaFlight Target: MATEKF722SE PDB Input voltage range: 9~36V (3~6S LiPo) w/TVS protection 2x ESC power pads Battery Voltage Sensor: 1:10 (Scale 1100) Current Senor: 132A,  3.3V ADC,  Scale 250 BEC 5V output Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed Continuous current: 2 Amps, Max.3A BEC 9V /12V output Designed for Video Transmitter, Camera, Gimbal ect. Continuous current: 2 Amps, Max.3A 12V option with Jumper pad BEC Vx output Designed for Servos Voltage adjustable, 5V Default, 6V or 7.2V via jumper Continuous current: 5 Amps, Max.6A Output Ripple: 50mV (VIn=24V, VOut= load) BEC 3.3V output Designed for Baro / Compass module and Spektrum RX Linear Regulator Continuous current: 200mA Physical Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm Dimensions: 54 x 36 x 13 mm Weight: 25g Matek Flight Controller F722-WING #m2e-gallery-6cbe078ce6777a2f367b {display: block;text-align: center;width: 560px;}#m2e-gallery-6cbe078ce6777a2f367b .full-image {width: 560px;display: none;}.m2e-gallery .hint {margin-top: 10px;margin-bottom: 10px;text-align: center;}.m2e-gallery .preview {display: inline-block;margin: 5px;height: 72px;}.m2e-gallery .preview > img {width: 68px;height: 68px;}.m2e-gallery .preview:hover > img {cursor: pointer;opacity: 0.3;}#m2e-gallery-6cbe078ce6777a2f367b .current > input:checked + img {display: inline-block;}.m2e-gallery .current {margin-bottom: 20px;}.m2e-gallery .current > input {visibility: hidden;position: absolute;}.m2e-gallery .current.vertical {float: right;width: 78%;text-align: left;}.m2e-gallery .preview-container.vertical {float: left;width: 20%;text-align: right;}.m2e-gallery .preview-container.vertical label {display: block;}.m2e-gallery .current.vertical .hint {text-align: left;} FC Specifications MCU: 216MHz STM32F722RET6 IMU: MPU6000 (SPI) Baro: BMP280 (I2C) OSD: AT7456E (SPI) Blackbox: MicroSD card slot (SPI) 5x Uarts (1,2,3,4,6) with built-in inversion 1x Softserial-Tx 2x Motors, 6x Servos outputs 1x I2C 4x ADC (VBAT, Current, RSSI, AirSpeed) 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red) Switchable Dual Camera Inputs Switchable 5V/9V for Camera/VTX High-precision Current Sense TR/SA VTX control: Yes WS2812 Led Strip : Yes Beeper : Yes RSSI: Yes Analog Airspeed sensor: Yes Digital Airspeed sensor: Yes FC Firmware INAV Flight/BetaFlight Target: MATEKF722SE PDB Input voltage range: 9~36V (3~6S LiPo) w/TVS protection 2x ESC power pads Battery Voltage Sensor: 1:10 (Scale 1100) Current Senor: 132A,  3.3V ADC,  Scale 250 BEC 5V output Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed Continuous current: 2 Amps, Max.3A BEC 9V /12V output Designed for Video Transmitter, Camera, Gimbal ect. Continuous current: 2 Amps, Max.3A 12V option with Jumper pad BEC Vx output Designed for Servos Voltage adjustable, 5V Default, 6V or 7.2V via jumper Continuous current: 5 Amps, Max.6A Output Ripple: 50mV (VIn=24V, VOut= load) BEC 3.3V output Designed for Baro / Compass module and Spektrum RX Linear Regulator Continuous current: 200mA Physical Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm Dimensions: 54 x 36 x 13 mm Weight: 25g We only accept PayPal on eBay, this means you can rest assured your order will be with you ASAP after your purchase. For your security we only despatch your order to the address you provide us via PayPal. As soon as you pay, eBay & PayPal will email you to let you know it's been received and as soon as we've shipped your order, we'll let you know by email that it has been despatched and the tracking number if applicable. "We want you to be 100% happy with your purchase and offer a 14 day "no quibble" guarantee" If you change your mind, or the purchase is not suitable, you may notify us to cancel the contract within 14 days after the day of receipt of item(s) and you have a duty to take reasonable care of the item(s) until we receive the item(s) back. Return posting costs will be at your expense. Any Questions? Please check this listing page carefully as the answer is usually there. If not, let us know and we'll try our hardest to reply within one working day. "" ( ) "" ( ) "" ( ) "" ( ) "" ( ) 4.1 2548 28084 helidirectrc 10-11-2017 02:27:26 10-11-2017 02:27:26 Protect Your Product With a Consumer Priority Service Warranty
FC Specifications
MCU: 216MHz STM32F722RET6
IMU: MPU6000 (SPI)
Baro: BMP280 (I2C)
OSD: AT7456E (SPI)
Blackbox: MicroSD card slot (SPI)
5x Uarts (1,2,3,4,6) with built-in inversion
1x Softserial-Tx
2x Motors, 6x Servos outputs
1x I2C
4x ADC (VBAT, Current, RSSI, AirSpeed)
3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
Switchable Dual Camera Inputs
Switchable 5V/9V for Camera/VTX
High-precision Current Sense
TR/SA VTX control: Yes
WS2812 Led Strip : Yes
Beeper : Yes
RSSI: Yes
Analog Airspeed sensor: Yes
Digital Airspeed sensor: Yes
FC Firmware
INAV Flight/BetaFlight
Target: MATEKF722SE
PDB
Input voltage range: 9~36V (3~6S LiPo) w/TVS protection
2x ESC power pads
Battery Voltage Sensor: 1:10 (Scale 1100)
Current Senor: 132A,  3.3V ADC,  Scale 250
BEC 5V output
Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
Continuous current: 2 Amps, Max.3A
BEC 9V /12V output
Designed for Video Transmitter, Camera, Gimbal ect.
Continuous current: 2 Amps, Max.3A
12V option with Jumper pad
BEC Vx output
Designed for Servos
Voltage adjustable, 5V Default, 6V or 7.2V via jumper
Continuous current: 5 Amps, Max.6A
Output Ripple: 50mV (VIn=24V, VOut= load)
BEC 3.3V output
Designed for Baro / Compass module and Spektrum RX
Linear Regulator
Continuous current: 200mA
Physical
Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
Dimensions: 54 x 36 x 13 mm
Weight: 25g
Matek Flight Controller F722-WING
FC Specifications
MCU: 216MHz STM32F722RET6
IMU: MPU6000 (SPI)
Baro: BMP280 (I2C)
OSD: AT7456E (SPI)
Blackbox: MicroSD card slot (SPI)
5x Uarts (1,2,3,4,6) with built-in inversion
1x Softserial-Tx
2x Motors, 6x Servos outputs
1x I2C
4x ADC (VBAT, Current, RSSI, AirSpeed)
3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
Switchable Dual Camera Inputs
Switchable 5V/9V for Camera/VTX
High-precision Current Sense
TR/SA VTX control: Yes
WS2812 Led Strip : Yes
Beeper : Yes
RSSI: Yes
Analog Airspeed sensor: Yes
Digital Airspeed sensor: Yes
FC Firmware
INAV Flight/BetaFlight
Target: MATEKF722SE
PDB
Input voltage range: 9~36V (3~6S LiPo) w/TVS protection
2x ESC power pads
Battery Voltage Sensor: 1:10 (Scale 1100)
Current Senor: 132A,  3.3V ADC,  Scale 250
BEC 5V output
Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
Continuous current: 2 Amps, Max.3A
BEC 9V /12V output
Designed for Video Transmitter, Camera, Gimbal ect.
Continuous current: 2 Amps, Max.3A
12V option with Jumper pad
BEC Vx output
Designed for Servos
Voltage adjustable, 5V Default, 6V or 7.2V via jumper
Continuous current: 5 Amps, Max.6A
Output Ripple: 50mV (VIn=24V, VOut= load)
BEC 3.3V output
Designed for Baro / Compass module and Spektrum RX
Linear Regulator
Continuous current: 200mA
Physical
Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
Dimensions: 54 x 36 x 13 mm
Weight: 25g
We only accept PayPal on eBay, this means you can rest assured your order will be with you ASAP after your purchase. For your security we only despatch your order to the address you provide us via PayPal.
As soon as you pay, eBay & PayPal will email you to let you know it's been received and as soon as we've shipped your order, we'll let you know by email that it has been despatched and the tracking number if applicable.
"We want you to be 100% happy with your purchase and offer a 14 day "no quibble" guarantee"
If you change your mind, or the purchase is not suitable, you may notify us to cancel the contract within 14 days after the day of receipt of item(s) and you have a duty to take reasonable care of the item(s) until we receive the item(s) back. Return posting costs will be at your expense.
Any Questions?
Please check this listing page carefully as the answer is usually there. If not, let us know and we'll try our hardest to reply within one working day.
"
"
(
)
"
"
(
)
"
"
(
)
"
"
(
)
"
"
(
)
4.1
2548
28084
helidirectrc
10-11-2017 02:27:26
10-11-2017 02:27:26
Protect Your Product With a Consumer Priority Service Warranty
eBay integration
by