iFlight Chimera 4 HD 4" BNF w/Caddx Nebula

Description

Introducing the first ultra-light LongRange 4inch BNF for every terrain from iFlight. Newest iFlight SucceX hardware onboard coupled with the XING 1404 motors in 3000kv. Slow cruising or speedy action, there's something for every taste. Get flight times above 15min using at least 4S 850mAh packs. Go crazy and strap a Li-On 4S pack on and go even further, depending on capacity and weight! GPS Rescue ready for easy recovery in case of signal loss, or even if you've been surfing those mountains and suddenly can't find the way back home... Betaflight OSD pre-setup GPS elements will show you the way!
CaddX Nebula camera with Vista Air Unit for fantastic imagery and performance in digital HD.
Outstanding digital FPV experience in 720p directly on your goggles. Custom iFlight 150mm LR antenna for best signal coverage even at long distances.
Features
:
Sub 250g long-range quad
XING 1404 3000KV Ultralight motors
GPS pre-installed for more safety at distance
SucceX-E mini F4 +35A 4in1 ESC Flystack
Naked for GoPro ready
360° TPU protection, Nebula cam protection, and antenna mounts
Caddx Nebula Digital HD System
Specifications
:
FRAME
Wheelbase: 178mm
Main body dimension: 136.8*114.8mm
Bottom to top distance: 28mm
Arm thickness: 4mm
Bottom plate thickness: 4mm
Top plate thickness: 2mm
TPU Camera plate thickness: 2mm
FC: 25.5*25.5mm/20*20mm/16*16mm
FPV Cam: 19mm Micro / 20mm
ELECTRONICS
SucceX-E mini F4
MCU: 168MHz STM32F405
Gyro: MPU6000
Blackbox: 8MB
Betaflight OSD: YES
BEC: 5V 2.5A
Uarts: 5
ESC Telemetry: yes
INA Pad: nuart2
Input voltage: 2-6S
Firmware: BETAFLIGHTF4
Size: 25*25mm /20*20mm φ3 mounting
Mounting hole: 20*20mm，φ3mm
Size: 25*25mm
Weight: 4g
NOTE: protocol RX input support, telemetry not supported.
ESC // SucceX-E mini 35A
MCU: BB21 F16G
BLHeliS
Capacitance: 470uF/50V
Current Sensor: Yes
Input: 2-6S LIPO
Constant: 35A / Burst: 40A
BEC: No
Supports up to Dshot600, Proshot, Oneshot, Multishot
Target: G-H-30
Weight: 6.9g
Mounting pattern: 20*20, φ3mm with Grommets φ2mm
Dimensions: 31*30mm (including the power pads)
Prebuilt and indoor tested FPV Racing Drone
Additional Suggested Parts (not included)
4S 850mAh  / 4S 1100mAh
TPU Naked GoPro Mount
DJI HD FPV Goggles
Radio Controller
DJI Remote Controller (Mode 1/ Mode 2)
Includes
:
1x iFlight Chimera 4 HD 4" BNF
1x Caddx Nebula Digital HD System
2x Albatross LHCP ipex 160mm Antennas
1x Nazgul 4030 Prop Set
1x Gemfan 4024 Prop Set
2x 15*15mm Microfiber PU Leather Battery Strap